Planar IT-100 Operating Manual page 33

− «F2 / New».
detecting.
− «F3 / Delete».
− «F4 / Rename». Renaming the channel plan in cursor position.
− «F5 / Drive».
USB flash drive.
− «F6 / Select».
4.3.12.2. Channel Plan Editing
The screen view of the channel plan table is shown in figure 4.20:
The table indicates channel number, channel name, its frequency and signal type.
Functional keys enable the following operations:
− «F1 / Edit».
− «F2 / New».
− «F3 / Delete».
− «F4 / Info».
channels quantity.
− «F6 / Save».
Channel selecting is performed with « » and « » keys or entering channel number
with alphanumeric keyboard. To edit selected channel press «F1 / Edit» or «ENTER» key.
The screen view in the channel parameters editing mode is shown in figure 4.21
Possible signal types and their parameters are as follows:
1) Common parameters:
Creating a new channel plan: empty or automatically
Deleting the channel plan in cursor position.
Channel plans source drive selecting: internal drive or
Selecting the channel plan in cursor position.
Figure 4.20
Editing the channel in cursor position.
Adding a new channel.
Deleting the channel in cursor position.
Viewing information about channel plan name and
Save changes and quit.
Figure 4.21
33
.