Tv Picture And Sound Analysis For Digital Channels; Tv Video And Sound Analysis For Analog Channels - Planar IT-100 Operating Manual

4.7.2. TV Picture and Sound Analysis for Digital Channels

To start the TV picture and sound analysis mode for digital TV channels, set up the
frequency to the required TV channel in the Channel measurement mode (section 4.3.3).
After channel synchronization press the «F5 / Video» key. The table will appear on the
screen as shown in figure 4.62.
The table includes the list of all programs and their parameters in the current
transport stream: program name, its type, video codec, number of sound tracks and
encrypted program icon. Use « » and « » keys to select program. Press the keys
together with «Shift» to navigate through programs with bigger step.
To view the selected program, press the «F1 / Play» key. A video from the selected
service will appear on the screen (figure 4.63). Video and audio stream parameters are
indicated in the right part of the table. If 2 or more audio tracks available, select the
needed track using the «F3 / ◄Audio» and «F4 / Audio►» keys or «◄» or «►» keys
together with «Shift». To view the video in the full screen mode, press the «F1 / Zoom»
key. To go back to the current mode, press «EXIT» key.
To adjust the volume of the sound, press the «◄» or «►» key.

4.7.3. TV Video and Sound Analysis for Analog Channels

To start the TV video and sound analysis mode for analog TV channels, set up the
frequency to the required TV channel in the Channel measurement mode (section 4.3.3).
After channel synchronization press the «F4 / Video» key. A video will appear on the
screen (figure 4.64).
Figure 4.62
Figure 4.63
82