Transport Stream Analysis Recommendations - Planar IT-100 Operating Manual

The table contains the following items for their exception from the analysis:
1) EIT excepted from analysis. Exception the EIT tables (current/following event)
of the current transport stream programs;
2) EIT-schedule excepted from analysis. Exception the EIT tables (several days
schedule) of the current transport stream programs;
3) EIT-other excepted from analysis. Exception the EIT tables (current/following
event) of the programs of the transport streams different from the current one;
4) EIT-other-schedule excepted from analysis. Exception the EIT tables (several
days schedule) of the current transport stream programs different from current
one;
5) SDT-other excepted from analysis. Exception the SDT tables of the transport
streams different from the current one;
6) ECM excepted from analysis. Exception the ECM elementary streams;
7) PCR of radio programs excepted from analysis. Exception the PCR
timestamps of all radio programs;
8) PCR of TV programs excepted from analysis. Exception the PCR timestamps
of all TV programs;
The selected exceptions are marked the
configuring are given in the section 4.6.4.
The cursor moves by using the « » and « » buttons. For selecting or deselecting
exception press «ENTER» or «F6» button. For selecting or deselecting of all the
exceptions press «F5 / All» button. To set the default exceptions selecting for the current
profile, press the «F2 / Default» button.
To exit from the mode with saving of changes it is necessary to press the «F1 /
Save» button. To exit and discard changes, press the «EXIT» button.

4.6.4. Transport stream analysis recommendations

Before starting to perform the transport stream analysis (especially long-term), it is
necessary to prepare the Analyzer as follows:
1) Set the required duration of the analysis in the settings (section 4.6.2);
2) Make sure the Meter is connected to the external power source when you are
planning a long-term analysis;
3) Make sure the required analysis profile is selected in the settings (section 4.6.2);
4) Make sure that the analysis settings correspond to the task (section 4.6.3);
5) Start the analysis of transport stream (section 4.6.2);
Figure 4.52
icon. Recommendations on exceptions
70