Planar IT-100 Operating Manual page 38

The screen shows the list of channel data logger pages. Each CDL page contains the
following data: status, page name, date and time of last measurement, name of related
channel plan and name of related limit plan.
Press the «►» key to view the related channel plan. Press «►» key again to view
related limit plan on the screen. Press «◄» key twice to return to view of last
measurement time and date.
To select one of the CDL pages viewing mode, open the popup menu by pressing
the «F1 / Page» key:
1) Open.
2) Info.
3) Graph.
development).
4) Delta.
You can delete the unnecessary CDL page by pressing the «F3 / Delete» key. A new
CDL page can be created using the «F2 / New» key. The «F6 / Sort» key allows selecting
the method of pages sorting in the table (by the last measurement time and date, status,
page name, channel plan or limit plan name). To select the CDL files source drive, press
the «F5 / Drive» key. Page can be measured with pressing «F4 / Start» key.
The status indicator specifies the CDL page state:
Grey indicator
Red indicator
Green indicator
When you create a channel data logger page (by pressing the «F2 / New» key), page
setup window will be displayed on the screen as shown in figure 4.25.
Figure 4.24
Opening the selected CDL page.
Viewing page parameters.
Viewing the selected CDL page in the Scan mode (in
Reading the selected CDL page in the Scan mode, and
indicating the difference between the CDL page channel levels
and current channel levels (in development).
38
Page created but not measured
Page measured, errors found
Page measured, errors not found