Controls And Indicators - Planar IT-100 Operating Manual

The screen displays name and type of the Analyzer. In approximately one second,
the Analyzer will open the main mode selection menu – Main Menu (figure 4.2) or the last
previously operated mode before the power was switched off (section 4.10.3).

4.2. Controls and Indicators

The location of controls, indicators and connectors is described in section 2.6.2.
To select an alternative function of a key, press the «Shift» key once. An alternative
function for switching between the measurements modes will appear in the field of
functional keys. The Analyzer will return to the basic functional keys layout after you press
any key.
To select a "hot key", press the «Shift» key and one of the alphanumeric keys with
additional functions simultaneously:
Key
7
8
.space
0
The Analyzer features interactive operating mode selection menu, which is basically
a set of graphical pictures (icons) on the LCD screen, each of which corresponds to a
certain mode. The selection menu is shown in figure 4.2.
Figure 4.1
Icon Function
Battery service mode (section 4.13)
Screenshot saving to file (section 4.11)
Remote feeding power supply control (section 4.3.1.5)
Volume adjustment (sections 4.7.2, 4.7.3)
15