Changing The Valve Housing - WAGNER GM 50000EAC Translation Of The Original Operating Manual

EDITION 05/2015
OPERATING MANUAL
7.3.11

CHANGING THE VALVE HOUSING

Changing the valve housing!
Damage to the device.
Activate the spray gun trigger when changing the valve housing.
To prevent damage to the gun (valve seat rubs on the valve needle, valve needle may
loosen), activate the spray gun trigger when changing the valve housing.
Use a socket or ring spanner (not an open-end wrench) to tighten the valve housing.
ORDER NUMBER DOC2319150
NOTICE
B_03847
52