Table of Contents
Advertisement
EDITION 05/2015
OPERATING MANUAL
8.2
MAINTENANCE
8.2.1
MAINTENANCE STAFF
Maintenance work should be undertaken regularly and carefully by qualifi ed and trained
staff . They should be informed of specifi c hazards during their training.
The following hazards may arise during maintenance work:
- Health hazard from inhaling solvent vapors
- Use of unsuitable tools and aids
An authorized person must ensure that the device is checked for being in a reliable state
after maintenance work is completed.
8.2.2
SAFETY INSTRUCTIONS
Observe the safety instructions in Chapter 4 and Chapter 8.1.2.
Prior to maintenance
- Flush and clean the device
After maintenance
- Carry out a safety check in accordance with Chapter 8.2.3.
- Put the device into operation (Chapter 6.6) and check for leaks (Chapter 11.3).
- Carry out a function test, if required, in accordance with Chapter 11.
In accordance with the guideline for liquid ejection devices (ZH 1/406 and BGR 500
Part 2 Chapter 2.29 and Chapter 2.36):
- The liquid ejection devices should be checked by an expert (e.g., WAGNER service
technician) for their safe working conditions as required and at least every
12 months.
- For shut down devices, the examination can be suspended until the next start-up.
Incorrect maintenance/repair!
Danger to life and equipment damage.
ORDER NUMBER DOC2319150
Chapter 8.1.3.
DANGER
Repair or replacement of devices or parts of devices are only
allowed to be performed outside the hazard area by qualifi ed
personnel.
58
Advertisement
Table of Contents
