Spray Gun; Tools - WAGNER GM 50000EAC Translation Of The Original Operating Manual

EDITION 05/2015
OPERATING MANUAL
10.3

SPRAY GUN

Plastic parts
Gently handle all plastic parts.
10.3.1

TOOLS

For disassembling and assembling the spray gun, the following tools are required:
- Allen wrench SW2
- Allen wrench SW3
- Allen wrench SW5
- Open-end wrench SW5
- Open-end wrench SW6
- Open-end wrench SW8
- Open-end wrench SW11
- Open-end wrench SW12
- Open-end wrench SW14
- Open-end wrench SW19
- Open-end wrench SW21
- Open-end wrench SW22
- Ring spanner SW9
- Ring spanner SW11
- Torx -wrench 20
- Torx -wrench 25
- Slide gauge
- Valve needle assembly tool, Order No. 2309368
- Clamping screw assembly tool, Order No. 2325263
Only as required:
- Handle seal assembly tool (Order No. 2342334, not included in scope of delivery)
Brand notice:
The brands specifi ed in this document are property of the respective owners. Loctite , for
example, is a registered brand of Henkel.
ORDER NUMBER DOC2319150
64