Table of Contents
Advertisement
EDITION 05/2015
OPERATING MANUAL
B_04787
7
B_04777
1
8
SW14
Two gold contact sleeves either
remain in the handle (1) or are
seated on the two gold pins (2).
Do not lose!
ORDER NUMBER DOC2319150
10
5
4
1
SW5
3
2
2
1. Loosen the oval head screw (3).
2. Pull the air valve (4) out off the drilled hole. Do not turn!
Do not damage the cylindrical surfaces. Ideally press on the
tappet from behind using a transversely held screwdriver, for
example.
3. Only as required:
Press out seal (5) using a handle seal assembly tool
(Order No. 2342334, not included in scope of delivery)
1. Remove pressure spring (4).
2. Loosen clamping screw (1) with
assembly tool (5).
3. Unscrew valve rod unit (2, 6, 7).
The packing (3) is also unscrewed
and removed.
4. Only as required:
Remove rod seal (10).
Do not damage the housing in
the process.
SW6
SW2
6 7
9
4
SW5
Torx® 20
5
3
B_04788
68
Advertisement
Table of Contents
