Table of Contents
Advertisement
EDITION 05/2015
OPERATING MANUAL
7.3.8
REPLACING THE AIRCOAT FLAT JET NOZZLES
1. Switch off control unit.
2. Relieve pressure
3. Secure the spray gun with the trigger lock.
4. Unscrew union nut completely (12) and unscrew air cap (10).
5. Remove ACF5000 AirCoat nozzle (11) and treat it with cleaning agent until all traces
of paint have been removed.
Defective AirCoat nozzle!
Insuffi cient paint application quality.
Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.
6. Insert new ACF5000 nozzle (11) into the valve housing.
7. Put the air cap (10) on the nozzle (11) and pay attention to the position of the guide
surfaces.
8. Screw union nut with attached nozzle guard (9) to the gun body and make sure that
the air cap horns lie in the designated recess (Y).
9. Before tightening with the air cap horns (Y), set the desired jet level and then tighten
the union nut to stop by hand.
Y
ORDER NUMBER DOC2319150
Chapter 7.3.4.
NOTICE
11
10
12
9
1
B_04387
48
Advertisement
Table of Contents
