Cleaning And Maintenance; Cleaning; Cleaning Staff; Safety Instructions - WAGNER GM 50000EAC Translation Of The Original Operating Manual

Electrostatic aircoat spray gun
Table of Contents

Advertisement

EDITION 05/2015
OPERATING MANUAL
8

CLEANING AND MAINTENANCE

8.1

CLEANING

8.1.1

CLEANING STAFF

Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff .
They should be informed of specifi c hazards during their training.
The following hazards may arise during cleaning work:
- Health hazard from inhaling solvent vapors
- Use of unsuitable cleaning tools and aids
8.1.2

SAFETY INSTRUCTIONS

Observe safety instructions in Chapter 4.
Incorrect maintenance/repair!
Danger to life and equipment damage.
ORDER NUMBER DOC2319150
DANGER
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the Chapter
"Spare parts" and that are assigned to the unit.
Before all work on the device and in the event of work interruptions:
- Switch off the energy and compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun against actuation.
Observe the operating manual and service manuals at all times
when carrying out work.
54

Advertisement

Table of Contents
loading

Table of Contents