WAGNER GM 50000EAC Translation Of The Original Operating Manual page 74

EDITION 05/2015
OPERATING MANUAL
Push the trigger upward into the
air valve piston. The recess in the
trigger must engage correctly in the
indentation of the piston.
9
Cover (5)
The cover must be
handled carefully and not
be twisted or distorted in
any way.
1. Press metal sleeve (6) back in cover (5) (e.g., press on table). In the process, only exert
counter pressure on the sleeve bracket and not on the entire cover.
2. Position cover straight and level, and carefully press in. Use only minimal force, gently
rocking from side to side if necessary.
3. Ensure that the cover is fl ush mounted on all sides.
4. Press back on metal sleeve for a fl ush fi t (e.g., press on table).
5. Position bracket (7).
6. Mount screw, plug, and air regulation.
ORDER NUMBER DOC2319150
8
7
B_04381
Torx® 25
5
0.8 Nm
SW3
SW12
2
(sparingly)
6
R2
Ensure the
SW12
correct insertion
position!
B_03206
74