WAGNER GM 50000EAC Translation Of The Original Operating Manual page 67

EDITION 05/2015
OPERATING MANUAL
5
Valve needle assembly tool,
Order No. 2309368
Clamping screw
assembly tool,
Order No. 2325263
Golden contact sleeve (10) remains in end piece (11) or
sits on resistance (12). Do not lose!
(The other gold contact sleeve is in the contacting (13).)
O-ring (8):
1. Use screwdriver no. 1 to
press under the O-ring.
2. Lever up the O-ring and
remove it.
ORDER NUMBER DOC2319150
27
SW9
Valve housing: Use an assembly tool or socket or ring spanner
(no open-end wrench).
Valve tip (27)
Loosen valve tip by hand using the valve needle
assembly tool (Order No. 2309368).
11 10
12
13
9
Do not pull out on contact wire.
8
Air distribution (9): 1. Locate the start of the thread for recessed internal
threading.
2. Lever under the air distribution ring directly in front of the start of the
thread using screwdriver no. 1.
3. As soon as the ring disengages, carefully undo it on all sides.
B_04786
6
B_04377
67