Table of Contents
Advertisement
EDITION 05/2015
OPERATING MANUAL
4
25
Do not tilt the product hose, but pull it straight out in the direction of arrow. At the same
time, execute slight rotational movements.
Fitting (25)
If the fi tting (25) does not come out with the product hose, it must be removed from the
gun adapter as follows:
- Screw the wood screw ( 3 mm; 0.12 inches, length 40 mm; 1.6 inches) into the fi tting (25),
max. 6 mm deep.
- Pull out straight with suitable pliers. Possibly rotate clockwise simultaneously.
- Thereafter, the fi tting must be replaced.
If the fi tting is broken in the gun adapter, WAGNER Service must be contacted.
ORDER NUMBER DOC2319150
SW19
SW22
SW19
Carefully release the
cascade without pliers.
B_03196
66
Advertisement
Table of Contents
