Validity Of The Manual - RMG PGC 9300 Operating Manual

1 About this manual
- Qualified persons have been authorized by the person responsible for
safety of personnel to carrying out such work on the basis of their training,
experience or instruction and familiarity with applicable standards, provi-
sions, accident prevention regulations and system conditions. It is essential
that these persons are able to recognize and avoid potential dangers in
good time.
10
1.2.6
This manual describes the gas chromatograph PGC 9300. The gas chromato-
graph
PGC 9300 is only part of a complete system. The manuals of the other compo-
nents of the system must be observed, too. If you find contradictory instructions,
contact RMG and/or the manufacturers of the other components.
Caution
Ensure that the power data of the current connection matches the specifi-
cations on the type plate. Observe any applicable national regulations in
the country of use. Use cable that is appropriate for the cable fittings (see
chapter 4.1. Electrical connections)
1.2.6.1
Observe the specifications of the system manufacturer and/or system operator.
1.2.6.2
Danger
Only use the gas chromatograph PGC 9300 in its original condition.
•
• Only operate the gas chromatograph PGC 9300 in fault-free and complete
condition. If you make technical changes to the device, safe operation can
no longer be guaranteed.
• When connecting additional measuring components or additional equipment
in explosion-prone areas, ensure that the appropriate explosion protection
is provided for these components.
Manual PGC 9300 EN07 June, 18th 2018

Validity of the manual

Danger during operation
Dangers of operation in EX areas