Table of Contents
Advertisement
Sampling Probe
Type PPS 02-R
extendable under pressure
min.dia.25mm
dia.12mm
Gas pipe
Appendix 1: Technical data
Sample outlet
1. Isolated screw connection for electrical isolation
2. Stopcock
3. Stopcock with back-up ring for extending/ retracting tool
4. Staight-way screw connection
5. Sample inlet/ feedback
6. Flanged-end connection head
7. Probe tube, dia. 12mm
8. Locking device (M10 nut)
9. Cover (Option)
10. Ball valve (to be provided by customer)
11. Weldolet (to be provided by customer)
Operating pressure 100 bar max.
All probe components are made of high-quality steel.
O-rings are made of Viton.
Screw connections and stopcocks are desingned for
Swaglok couplings.
The connection head can be designed as follows:
DIN flange DN40/50 pressure class PN10-100
ANSI flange 1.5"/ 2" pressure class ANSI 150-600
The engaged length L1 can be adjusted between
330 to 430mm, 430 to 530mm or 585 to 685mm during
initial installation.
The probe length L2 is between 300mm and 400mm
depending on the engaged length L1.
Recommended engaged length L3=1/3 DN (50mm min.)
Weldolet, ball valve, seals, screw bolt and nut between
the probe and the ball valve are not included in the delivery.
Make sure that the hole in the piping is centrically adjusted
with the pipe section and the ball valve and has a
minimum diameter of 25mm.
Manual PGC 9300 EN07 June, 18th 2018
61
Advertisement
Table of Contents
