MacDon M1170 Assembly Instructions Manual page 79

10. Rotate operator's seat to engine-forward mode.
11. Press ROAD LIGHT switch (A), and check that front
road lights (B) and rear red tail/brake lights (C) are
functioning.
12. Press HIGH/LOW switch (D) and check lights (B).
13. Press TURN SIGNAL switches (E) switches on console
and check amber lights (F).
14. Press HAZARD LIGHT switch (G) and check flashing
hazard lights (F).
15. Press switches to shut off lights.
214735
PERFORMING PREDELIVERY CHECKS
69
D
Figure 4.43: Road Lights – Engine-Forward
E
G
A
F
B
F
C
Revision A