MacDon M1170 Assembly Instructions Manual page 66

2. Move ground speed lever (GSL) (A) into PARK (C).
3. Turn steering wheel until it locks. It may be possible to
move the steering wheel slightly in the locked position.
IMPORTANT:
Do NOT attempt to force the wheel out of the locked
position or damage to the steering system may occur.
4. Fasten seat belt.
5. Push HEADER ENGAGE switch (B) to ensure it is in
the OFF position.
6. Turn IGNITION switch (A) to the ON position; the
Harvest Performance Tracker (HPT) (B) will illuminate.
If HPT is still booting up, wait for WAIT TO START
(WTS) symbol (C) to disappear before trying to start
engine.
7. Check that red PARK symbol light (D) is ON and that
there are no error messages on screen.
8. Press HORN button (E) three times.
214735
PERFORMING PREDELIVERY CHECKS
56
A
Figure 4.20: Operator Controls
D
C
Figure 4.21: Operator Console and HPT
Run Screen
C
B
B
E
A
Revision A