MacDon M1170 Assembly Instructions Manual page 35

9. Align holes at pin locations and use the slide
hammer (B) to reinstall pins (A). If necessary, adjust
jack to prevent damage to the outer edges of the pins.
10. Secure pins with bolts (A), washers, and nuts. Torque
nuts to 136 Nm (100 lbf·ft).
11. Lower pallet jack and move it from work area.
12. Support the windrower with forklift, remove stand, and
lower windrower to ground.
214735
ASSEMBLING THE WINDROWER
Figure 3.18: Leg Pin
Figure 3.19: Right Leg
25
A
B
A
Revision A