MacDon M1170 Assembly Instructions Manual page 34

5. Remove two bolts (A), washers, and nuts from frame.
6. Adjust lift height until pin (A) is loose. Extract pin from
front of frame with a slide hammer (B) (MD #209816)
(tool required due to limited space in front of fuel tank).
Instructions are included with the tool.
NOTE:
Removing the pins will be difficult if weight is still on
the leg.
7. Repeat for second pin.
8. Move leg outwards to expose one hole (A) in frame.
214735
ASSEMBLING THE WINDROWER
Figure 3.15: Windrower Right Leg
Figure 3.16: Slide Hammer
Figure 3.17: Repositioning Right Leg
24
A
B
A
A
Revision A