MacDon M1170 Assembly Instructions Manual page 112

8. Install male coupler onto pressure fitting (A), and female
coupler onto return fitting (B) on windrower.
9. Tighten couplers onto fittings.
10. Retrieve following parts from the bag located inside left header support:
Figure 4.127: Hydraulic Drive Parts
A - 253785, Hose, Hyd, Knife Pressure (1)
D - 253783, Bracket, Coupler Holder (1)
214735
PERFORMING PREDELIVERY CHECKS
A
B - 136413, Fitting, Coupling, Female (1)
E - 135718, Cap, Hyd, SAE-16 ORFS (1)
Figure 4.126: Couplers
B
E
C - 243604, Cap, Harness (1)
102
A
B
C
D
Revision A