Transportation - Universal Robots UR5e User Manual

As supplied on the pallet, the robot and Control Box are a calibrated set. Do not separate them
as this would require recalibration.
Only transport the robot in its original packaging. Save the packaging material in a dry place if
you want to move the robot later.
When moving the robot from its packaging to the installation space, hold both tubes of the robot
arm at the same time. Hold the robot in place until all mounting bolts are securely tightened at
the base of the robot.
Lift the Control Box by its handle.
Version 5.0.2

3 Transportation

WARNING:
1. Make sure not to overload your back or other bodyparts
when lifting the equipment. Use proper lifting equipment.
All regional and national lifting guidelines shall be followed.
Universal Robots cannot be held responsible for any damage
caused by transportation of the equipment.
2. Make sure to mount the robot according to the instructions in
chapter 4.
I-19 UR5e/CB5