Menu Overview - Extron electronics IN1606 User Manual

Scaling presentation switchers
Hide thumbs Also See for IN1606:
Table of Contents

Advertisement

Menu Overview

In the OSD menu, the IP address and firmware version are displayed in the top border. The
active input settings and output resolution are displayed in the bottom border. The OSD
menu contains nine submenus with various submenu items of adjustable settings or device
information. Use the Menu, Enter, and Navigation buttons to navigate the OSD menu.
To open the OSD menu:
1.
2.
To navigate the OSD menu:
1.
Submenus
Quick Setup
Auto-Image
User Presets
Recall
Picture Controls
Image
Position
Input
Auto-Image
Output
Resolution
Audio
Audio Mute
Advanced
Test Pattern
Communication
Remote Port
Device Info
Unit Name
(Read Only)
NOTE: The Communication submenu is normally locked. Press and hold the Enter
2.
3.
4.
To adjust a submenu item:
1.
2.
3.
To exit the OSD menu:
Hold the Menu button for 3 seconds to exit the OSD menu.
Connect a display device to an HDMI output connector.
Press the Menu or Enter button to open the OSD menu.
Press the Up or Down button to navigate the nine submenus. The following table shows
the nine submenus and their respective submenu items.
Input Format
EDID
Save
Clear
Image Size
Brightness/
Contrast
Input Format
Film Mode
HDMI "A"
HDMI "B"
Format
Format
Audio Format
Gain
Screen
Auto-Image
Saver/
Timeout
MAC
DHCP
Address
Firmware
Temperature
button for 10 seconds to unlock the submenu items.
Press the Enter or Right button to open submenu items.
Press the Up or Down button to navigate the submenu items.
Press the Menu button to exit a submenu item or return to the previous submenu.
Navigate to an adjustable item and press the Enter or Right button to select the
submenu item.
Press the Left or Right button to select a submenu item or a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the Up or Down
button to select a value.
Press the Enter button to accept the new value.
Press the Menu button to cancel any pending changes.
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation
Submenu Items
Output
Audio Mute
Test Pattern
Resolution
Color/Tint
Detail
Horizontal/
Horizontal/
Total Pixels/
Vertical Start
Vertical
Active
DTP "C"
HDCP
Format
Notification
(IN1608)
Mic/Line
Mic/Line
1 Gain/
2 Gain/
Phantom
Phantom
Aspect Ratio
Auto Memory
IP Address
Subnet Mask
Active Input
Active Output
Details
Details
DHCP
IP Address
HDCP
Phase
Authorization
Mic/Line
Program
Output 1/2
Volume
Volume
Overscan
Auto Switch
Factory
Gateway
Detected
Displays
EDID
Format
Reset
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

In1608In1608 saIn1608 ma

Table of Contents