Menus, Configuration, And Adjustments; Menu Navigation Using Front Panel Controls; Menu Overview - Extron electronics DVS 304 Series User Manual

Menus, Configuration, and Adjustments

Menu Navigation Using Front Panel Controls

Menu Overview

EXTRON
Power
on ELECTRONICS
Scaler configuration and adjustments can be performed by using the embedded Web
pages and the Windows-based control program (see the
Control chapter, beginning on page 30, for details) or by using the front panel controls
and the menus displayed on the LCD screen of the DVS unit. These menus are used
primarily when the scaler is first set up.
Menu button — Press the Menu button to activate menus and scroll through the eight
main menus.
Next button — Press the Next button to move between the submenus of a selected
main menu. Pressing the Next button during input configuration causes the current
number and format type of the input to be displayed on the LCD.
Adjust ([,{) knobs — In configuration mode, rotate the Adjust horizontal ([) knob
and Adjust vertical ({) knob to scroll through submenu options and to make adjustment
selections. Refer to the flowcharts in this chapter and to specific sections for explanations
on knob adjustments.
The appears on the LCD when no adjustments are actively being made.
Default Cycle
The screens cycle between the screen that shows the active number and video format
and the current output resolution of the input, as shown below:
DVS 304
xxx xx
2 sec.
2 sec.
Displays specific model name
(for example DVS 304 DVI AD)
Figure 9. Default Menus
NOTE: From any menu or submenu, after 20 seconds of inactivity the DVS will save
all adjustment settings and time-out to the default cycle.
The main menus are shown on the following pages. Use the
between them.
NOTE: If no signal is present on the currently selected input,
place of the input type, for example,
60-xxxx-xx
FW ver. 1.xx
2 sec.
Displays specific model part
number (for example 60-1027-04)
INPUT 4 NO SIGNAL
SIS Communication and
Default Cycle
INPUT 1
OUTPUT
COMPOSITE
1024 x 768@60
2 sec.
button to scroll
Menu
appears in
NO SIGNAL
.
DVS 304 Series • Operation
2 sec.
10