Image Settings Page - Extron electronics IN1606 User Manual

Image Settings Page

From this page, signal sampling and picture control settings can be adjusted, user and input
presets can be saved and recalled, and overscan settings can be applied. Click the
Settings
Figure 38.
Signal Sampling panel
Signal sampling optimizes the input signal to the scaler for the currently selected input.
Figure 39.
To manually adjust signal sampling settings, enter a value within the Min and Max values
displayed to the right of each adjustable setting or click the
beside a chosen value for a signal sampling setting indicates that it is a default value for the
applied video signal.
To automatically adjust these settings, perform one of the following:
• Click the
• Click the
entire video output (ignores aspect ratio setting).
• Click the
maintain the aspect ratio of the input signal (ignores aspect ratio setting).
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
icon on the Global Navigation Bar to open the Image settings page.
Image Settings Page
Signal Sampling Panel
button to perform a one-time Auto-Image.
Auto-Image
button to perform a one-time Auto-Image and fill the
Auto-Image & Fill
Auto-Image & Follow
or
Up
button to perform a one-time Auto-Image and to
Image
arrows. An asterisk
Down
63