Menu Overview - Extron electronics DVS 605 Series User Manual

Menu Overview

After start-up, when no adjustments are actively being made, the "default cycle" appears on
the LCD. The screens cycle between the number and video format of the active input and
the current output resolution.
Pressing the Menu button once brings up the first of eight main (top level) menus, as shown
in figure 9. Each successive press of the Menu button goes to the next main menu.
Default Display Cycle
2
IN RGBHV sec. IN 31.47 kHz
#1 640x480 #1 59.94 Hz
OUTPUT
2 sec. 2 sec.
720p@60
Figure 9.
A fourth default cycle menu appears only when genlock is enabled (see
modes
on page 20 for details).
NOTE: From any menu or submenu, after 20 seconds of inactivity the DVS saves all
adjustment settings and times out to the default cycle.
The flowchart
system, with configuration submenus and the items for each setting. In the flow charts, the
use of x, (for example, in x or Inx) indicates an input number.
Use the Menu button to scroll between top level menus and press Next to enter the
submenus.
NOTE: If no signal is present on the currently selected input, NO SIGNAL appears in
place of the input type. For example, INPUT 4 NO SIGNAL.
Details of each of the menus are on subsequent pages after the main flow chart.
Menu
Menu
USER
PRESETS
AUDIO
Menu
CONFIG
Menu
Next
Top Level Menus
shown on the next page provides an overview of the complete menu
INPUT
Menu
PICTURE
CONFIG
CONTROL
ADVANCED VIEW COMM
Menu
SETTINGS
CONFIG
DVS 605 • Operation
OUTPUT
Menu
CONFIG
Menu
Menu
EXIT MENU?
PRESS NEXT
Menu
Next
Genlock/AFL
14