Internal Web Pages; Accessing The Internal Web Pages; Turning Off Compatibility Mode - Extron electronics IN1606 User Manual

Internal Web Pages

The scalers feature an on-board web server, displayed as a set of internal web pages. These
pages allow for control and operation of the scaler through a LAN or WAN connection. Use
a web browser to view the pages on a PC connected to the scaler.
NOTE: The scaler internal Web pages do not support compatibility mode in Microsoft
This section gives an overview of the internal Web pages, which are always available and
cannot be erased or overwritten. Topics in this section include:
•
•
•
•

Accessing the Internal Web Pages

1.
2.
3.
4.
5.
6.

Turning Off Compatibility Mode

The internal web pages do not support compatibility mode in Microsoft Internet Explorer.
To check compatibility view settings:
From the
Compatibility View Settings dialog box opens.
Be sure that the
and that the IP address of the scaler is not in the list of websites that have been added to
Compatibility view.
Internet Explorer (see Turning Off Compatibility Mode
®
using Mozilla Firefox or Google Chrome™.
® ®
Accessing the Internal Web Pages
Navigating the Internal Web Pages
Configuration Pages
Hardware Pages
Connect the scaler to a LAN or WAN using the rear panel RJ-45 connector.
Open a web browser on a connected PC.
Enter the IP address of the device in the browser
NOTE: The default IP address is 192.168.254.254.
Press the <Enter> key on the keyboard.
The scaler checks if the device is password-protected.
If the device is not password-protected, the web pages open.
•
If the device is password-protected, enter a user name entry ("user" or "admin") in
•
the field and the password in the
User Name
Click the button.
OK
menu of the browser, select
Tools
Display all websites in Compatibility View
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
below). Extron recommends
field.
Address
field when prompted.
Password
Compatibility View Settings
check box is clear,
®
. The
56