Communication Settings Page - Extron electronics IN1606 User Manual

Communication Settings Page

The Communication Settings page contains options to adjust device settings for RS-
232 and Ethernet connections. Click the
Navigation Bar to open the page.
Figure 57.
RS-232 settings
1. From the
2. Click the
Ethernet settings
To configure the Ethernet settings for use with DHCP:
1. Select the
2. Click the
To configure the Ethernet settings with a static IP address:
1. Ensure the
2. In the
3. In the
4. In the
5. In the
6. Click the
To reset to default settings:
To reset the device to default connection values, click the
To cancel changes:
At any time, click the Cancel button to keep the last saved settings.
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
Communication Settings Page
drop-down menu, select the appropriate baud rate.
Baud Rate
button.
Apply
check box.
Use DHCP
button.
Apply
check box is not selected.
Use DHCP
field, enter an IP address.
IP Address
field, enter the subnet mask if required.
Subnet Mask
field, enter the default gateway if required.
Default Gateway
field, enter a DNS server name if required.
DNS Sever
button.
Apply
Communication Settings
Reset to Default
icon on the Global
button.
80