Size And Position Page - Extron electronics IN1606 User Manual

Size and Position Page

The Size and Position page consists of three methods of adjusting image output size and
position: graphically, numerically, or automatically with Auto-Image. Click the
Position
Figure 43.
To adjust the size and position graphically:
If desired, click the
1. Click and drag the drag points of the sample image to resize the image within the
designated space (defined by the black area in figure 45 above).
2. Click anywhere inside the sample image (see the blue rectangle with a circle inside in
figure 45 above) and drag it anywhere within the designated space to reposition the
image.
To adjust the size and position numerically:
1. Enter a value or click the
Vertical Size
2. Enter a value or click the
Vertical Position
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following (see
page 20 for more details on Auto-Image settings):
• Click the
Click the
•
entire video output (ignores aspect ratio settings).
• Click the
maintain the aspect ratio of the input signal. (ignores aspect ratio settings)
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
icon on the Global Navigation Bar to open the Size and Position page.
Size and Position Page
Lock Aspect Ratio
or
Up Down
fields.
or
Up Down
fields.
button to perform a one-time Auto-Image.
Auto-Image
button to perform a one-time Auto-Image and fill the
Auto-Image & Fill
Auto-Image & Follow
check box to constrain proportions.
arrow in the
Horizontal Size
arrow in the
Horizontal Position
button to perform a one-time Auto-Image and to
Size and
and
and
Auto-Image
on
67