Reset Device Page - Extron electronics IN1606 User Manual

Reset Device Page

This page allows the user to reset the device. Click on the
Global Navigation Bar to open the page.
Figure 62.
There are three reset options:
Reset Device Settings (Retains TCP/IP Settings) — Resets the settings associated
•
with input settings, the output image, EDID, and audio, and also includes presets and
auto memories (excludes communication settings).
This is equivalent to the
NOTE: Communication settings include the IP address, subnet mask, gateway
IP address, device name, DHCP setting, and port mapping.
• Reset Device Settings and Delete Files (Retains TCP/IP Settings) — Resets
all settings on the device to factory defaults (deletes user files), except the Ethernet
settings.
This is equivalent to the
Reset All Settings and Delete Files — Resets all settings on the device to factory
•
defaults (deletes user files) including the communication settings.
This is equivalent to the
NOTES:
•
•
To reset the device:
1. Click the radio button of the desired reset option.
2. Click the
3. In the dialog box, click the
button to abort the reset.
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
Reset Device Page
E }
ZXXX
E }
ZY
E }
ZQQQ
The default IP address is 192.168.254.254.
The default DHCP setting is Off.
button. A confirmation dialog box opens.
Apply
button to continue with the reset, or the
Reset
Reset Device
SIS command.
SIS command.
SIS command.
icon from the
Cancel
85