Storage Upgrade Function; Transmitting Files To The Pc - EDAN SE-601A User Manual

SE-601 Series Electrocardiograph User Manual
On the File Manage screen, files can be printed, transmitted or deleted.
If there is no file on the File Manage screen, the following dialog box will pop up when you
press function keys.
1. When files are being printed, transmitted, deleted or copied, you can not turn off the
electrocardiograph.
2. Do not cut off the mains supply directly when no battery is installed in the device, or
else, the stored data may be lost.

8.1 Storage Upgrade Function

SE-601A can accommodate 50 files, SE-601B can accommodate 100 files, and SE-601C can
accommodate 200 files. For SE-601A/B, you can input special password to enable the storage
upgrade function, which can extend the storage to 200.
If you need this function, please contact the local distributor to purchase it.

8.2 Transmitting Files to the PC

NOTE:
1. To transmit files to the PC, the Smart ECG Viewer software of the manufacturer must
be installed in the PC. You should log into the Smart ECG Viewer software before
transmission.
2. If necessary, you can press Esc to cancel the operation during the course of
transmitting all the files.
Figure 8-5 SE-601A File Manage Screen2
Figure 8-6 SE-601A File Manage Screen3
CAUTION
- 62 -
Managing Files