EDAN SE-601A User Manual page 110

SE-601 Series Electrocardiograph User Manual
2. Printing Problems
Q1: I was encountered with paper-jam, what was I supposed to do?
A1: If it happened for the first time, it might be the result of an inappropriate placement of the
paper. In this case, please open the recorder casing, pull the paper out of the paper tray, tear
the pages with rumples, and then put the paper in the paper tray again, adjust the position of
the paper carefully and close the casing.
If it happened several times, it might have something to do with your operating. If Paper
Marker is set to Style1 or Style2, and the printing course is often stopped manually in the
AUTO or RHYT mode, it may cause paper-jam sometimes because of the back-rolling of
the thermal recorder. In this case, if the manual termination of the printing course in the
AUTO or RHYT mode happens frequently, Paper Marker in the Record Setup window
should be set to No, which brings no back-rolling at the beginning of the printing course.
If none of the above-mentioned situations is applicable, there might be some problem with
the printing module. Please contact the manufacturer or the local distributor for further
disposal.
Q2: The hint Paper Error is displayed on the screen, what should I do?
A2: It might be the result of unsuccessful detection of the black markers, first open the recorder
casing so as to clear the error information, and then check whether the black marker is on the
bottom of the paper. Reload the paper in the paper tray. If it doesn't work, change the paper.
If the problem still exists, please contact the manufacturer or the local distributor for further
disposal.
Q3: The hint No Paper is displayed on the screen, what should I do?
A3: Check whether the paper runs out, or the black marker is just facing the black marker
detection window on the thermal printing head, as the following figure shows.
Reload the paper in the paper tray, close the recorder casing firmly. If the problem still exists,
please contact the manufacturer or the local distributor for further disposal.
- 103 -
Troubleshooting