Manual Mode - EDAN SE-601A User Manual

SE-601 Series Electrocardiograph User Manual
After setup, press Esc or the function key F5 below
screen.
2. When the main screen1 is displayed, press the MODE key to select the AUTO mode. Press
F2 to switch the gain. Press F3 to select a paper speed. Press F4 to set the EMG filter and
the Lowpass filter.
3. Press the START/STOP key to print an ECG report. It will stop automatically after
printing a complete ECG report of 12 leads. Or press the START/STOP key again to stop
printing the report.

7.2 Manual Mode

Operation Method:
1. To set Manual Style or Lead Sequence (Optional)
When the main screen1 is displayed, press the function key F5 below
main screen2. Press the function key F1 below Setup to display the System Setup screen
and the cursor is on Work Mode. Press Enter to open the Work Mode Setup window.
1) For SE-601B/C, press F1 or F2 to select MANU. For SE-601A, press F3 or F4 to
select MANU.
2) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Manual Style item,
and then press F1 or F2 to select a style.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Manual
Style item, and then press F3 or F4 to select a style.
3) Press Enter to confirm.
SE-601B / SE-601C Lead Setup Window
SE-601A Lead Setup Window
- 45 -
Printing ECG Reports
to exit the System Setup
to open the