EDAN SE-601A User Manual page 55

SE-601 Series Electrocardiograph User Manual
5) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Rhythm
Lead1/2/3 item, and then press F1 or F2 to select a lead.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Rhythm
Lead1/2/3 item, and then press F3 or F4 to select a lead.
6) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Lead Sequence
item, and then press F1 or F2 to select a sequence.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Lead
Sequence item, and then press F3 or F4 to select a sequence.
7) Press Enter to confirm.
After setup, press Esc or the function key F5 below
screen.
2. When the main screen1 is displayed, press the MODE key to select the RHYT mode. Press
F2 to switch the gain. Press F3 to select a paper speed. Press F4 to set the EMG filter and
the Lowpass filter.
3. Press the START/STOP key and the hint information Sampling will be displayed on the
LCD screen, and the sampling time will be counted. When the sampling time reaches 60s
in the Single Lead style or 20s in the Three Lead style, it begins to print an ECG report.
4. It will stop automatically after printing a complete report of rhythm-lead ECG waveforms.
Or press the START/STOP key again to stop printing the report.
SE-601B / SE-601C Lead Setup Window
SE-601A Lead Setup Window
- 48 -
Printing ECG Reports
to exit the System Setup