Chapter 9 System Setup; Work Mode Setup - EDAN SE-601A User Manual

SE-601 Series Electrocardiograph User Manual System Setup

Chapter 9 System Setup

After you turn on the device, the main screen1 pops up. Press the function key F5 below
to open the main screen2. Then press the function key F1 below Setup to open the System Setup
screen.
Figure 9-1 SE-601B / SE-601C System Setup Screen
Figure 9-2 SE-601A System Setup Screen
After setup, press Esc or the function key F5 below to return to the main screen1.

9.1 Work Mode Setup

When the cursor is on Work Mode on the System Setup screen, press Enter to open the Work
Mode Setup window.
In the Work Mode Setup window, you can set Work Mode, Manual Style, Rhythm Style, Auto
Style, Sample Mode, Record Sequence and Sample Time.
- 73 -