EDAN SE-601A User Manual page 29

SE-601 Series Electrocardiograph User Manual
Name
A Name
B ID
C Hint Information
D Work Mode
E Heart Rate
F Current Time
G Battery Symbol
H
I 100Hz
J 25mm/s
K 10mm/mV
O
P
Figure 3-4 SE-601A Main Screen2
Explanation
Patient Name: within 12 characters (for SE-601B/C)
within 10 characters (for SE-601A)
When ID Mode is set to Auto or Time, the patient ID is within
10 characters.
When ID Mode is set to Manu, the patient ID is within 18
characters.
Including Lead Off, No Paper, Paper Error, Battery Weak,
Modu Error, Demo, Sampling, Analyzing, Recording, Learning,
Transmitting, Transmit
Overload, U Disk, USB Printer, Testing
MANU, AUTO, RHYT or R-R
Actual Heart Rate
Refer to Section 9.8, "Date & Time Setup"
Identify the current capacity of the battery
Press the function key F5 below
screen2
EMG Filter: 25Hz, 35Hz or 45Hz
Lowpass Filter: 75Hz, 100Hz or 150Hz
Paper Speed: In the MANU mode, you can set Speed to
5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s or 50mm/s.
In the AUTO and RHYT modes, only 25mm/s and 50mm/s
are available. In the R-R mode, only 25mm/s is available.
Gain: 10 mm/mV, 20 mm/mV, 10/5 mm/mV, AGC, 2.5 mm/mV
or 5 mm/mV
- 22 -
About SE-601 Application
N
Fail, Detecting,
to open the main
Memory Full,