EDAN SE-601A User Manual page 39

SE-601 Series Electrocardiograph User Manual
4. Pull the paper out with the grid side facing the thermal print head, and shut the recorder
casing.
5. Press down the recorder casing firmly.
6. To select Paper Marker.
1) When the 6-channel electrocardiograph is powered by the mains supply or a battery,
press
2) After the main screen1 is displayed, press the function key F5 below
the main screen2. On the main screen2, press the function key F1 below Setup to open
the System Setup screen.
3) Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Record on the System
Setup screen, and then press Enter to open the Record Setup window.
4) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Paper Marker item
in the Record Setup window, and then press F1 or F2 to select an option.
5) For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Paper Marker
item in the Record Setup window, and then press F3 or F4 to select an option.
6) Press Enter to confirm, and then the System Setup screen appears. Then press Esc or the
function key F5 below
For details of the paper marker, please refer to Section 9.3.2, "Selecting Paper Marker".
7. Advance the recorder paper.
Before printing, if Paper Marker is set to Style1 or Style2, you can press
advance the recorder paper to the next black marker; if Paper Marker is set to No, you can
press
advancing the paper.
on the keyboard to turn on the unit.
to advance the paper for about 2cm. Pressing
to return to the main screen1.
- 32 -
Operation Preparations
to open
again can stop
to