EDAN SE-601A User Manual page 30

SE-601 Series Electrocardiograph User Manual
L Patient
M ECG waveform
N
O File
P Setup
To Open the main Screen3
If Next Patient is set to On, in the AUTO mode, press the START/STOP key to print ECG
reports, and the system will automatically open the main screen3 after a complete ECG report is
printed.
On the main screen3, pressing the function key F1 below Same can return to the main screen1,
and all the patient information will keep the same; pressing the function key F2 below Next can
return to the main screen1, all the patient information will be cleared, and patient ID will be
refreshed.
Press the function key F1 below Patient to display the Patient
Information window
Display ECG waveform
Press the function key F5 below
screen1
Press the function key F2 below File to open the File Manage
screen. For details, please refer to Chapter 8, "Managing Files".
Press the function key F1 below Setup to display the System
Setup screen. For details, please refer to Chapter 9, "System
Setup".
Figure 3-5 SE-601B / SE-601C Main Screen3
Figure 3-6 SE-601A Main Screen3
- 23 -
About SE-601 Application
to return to the main