EDAN SE-601A User Manual page 32

SE-601 Series Electrocardiograph User Manual
Take the Work Mode Setup window for example:
On the System Setup screen, press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor. When
the cursor is on Work Mode, press Enter to display the Work Mode Setup window.
Item
Option
For SE-601B/C
1. in the Work Mode Setup window, press Tab or Shift + Tab to move the cursor among
different setup menus.
2. Press F1 or F2 to select an option in a setup menu.
3. Press Enter to confirm, or press Tab or Shift + Tab to move the cursor to the OK button, and
then press Enter to confirm.
4. Press Esc to cancel the operation, or press Tab or Shift + Tab to move the cursor to the
Cancel button, and then press Enter to cancel the operation.
For SE-601A
1. in the Work Mode Setup window, press F1, F2, Tab or Shift + Tab to move the cursor among
different setup menus.
2. Press F3 or F4 to select an option in a setup menu.
3. Press Enter to confirm, or press Esc to display a hint to prompt you to save these
modifications.
Figure 3-9 SE-601B / SE-601C Work Mode Setup Window
Figure 3-10 SE-601A Work Mode Setup Window
- 25 -
About SE-601 Application