EDAN SE-601A User Manual page 74

SE-601 Series Electrocardiograph User Manual
2) Press the function key F2 below File to open the File Manage screen1. Press the
function key F5 below
3) Press the function key F2 below AllToUSB to copy files from SE-601 to the ECGDATA
folder of the U disk. Or press the function key F3 below USBToECG to copy files from
the ECGDATA folder of the U disk to SE-601.
3. Or copy a file from SE-601 to the U disk
1) When the main screen1 is displayed, press the function key F5 below
the main screen2.
2) Press the function key F2 below File to open the File Manage screen1.
3) Press F1, F2, Shift + F1 or Shift + F2 to highlight a file, and then press the function key
F4 below Select to select the file and open the File Manage screen3.
4) Press the function key F3 below To USB to copy the selected file from SE-601 to the
ECGDATA folder of the U disk.
If the U disk is not connected well, the hint U disk is not ready! will be displayed on the LCD
screen of the electrocardiograph, and then you should connect the U disk again. If it fails to copy
files, the hint file copying fails! will pop up. After the electrocardiograph successfully copy files,
the hint file copying succeeds! will be displayed.
During the copying course, if there are cognominal files in the U disk and the electrocardiograph,
the following hint (a or b) will pop up. Press Enter to close the hint. You should remove all
cognominal files from the U disk or the electrocardiograph, and then continue to copy files.
It is forbidden to connect or disconnect a U disk or a USB printer during the copying
course.
to display the File Manage screen2.
(a)
(b)
CAUTION
- 67 -
Managing Files
to open