VE-H100B Veterinary Pulse Oximeter User Manual
change from real line to broken line.
After choosing ID, press the Function button to confirm the setup.
If the ID exists, the following confirmation dialog box will pop
up.
Figure 3-15 Confirm to Cover Data
3.3.13 Data Storage
Choose Data Storage, and set it to ON, then the measurement
data can be stored.
During the data storage, ID can not be changed. If the user wants
to change ID, he should change Data Storage to OFF, then set a
new ID.
Data stored in the oximeter can be exported through Oximeter
Viewer Data Management Software. Please refer to section 3.2.4
for Data transfer procedure.
When the memory space is full, an icon
will be displayed
in information area. Meanwhile Data Storage changes to OFF
automatically. Restart the oximeter and a dialog box pops up. The
user should confirm it to delete all the data.
- 48 -