Meter Information Editor - Elster A1140 User Manual

32
A1120/1140 Programmable Polyphase Meter Users Manual
___________________________________________________________________

Meter Information Editor

This Editor is used to reference data related to a specific meter and its location, the type of
communications and security information. To open the Information Editor, double click on a meter.
The dialog is divided into three Tabs, Communications, Hardware and Identifiers.
Hardware
Information on the Meter type, Connection type, number of elements, Number of internal relays and
Plug in modules is entered (see above).
Communications
This page allows the Communications parameters to be entered.
To Enter Communications Parameters
Enter the connection method and any outstation no., telephone no., baud rate as required
Note:- If a suitable Connection method already exists, it can be selected from the Connection List.
For new connections refer to Section 8.1
© Elster Metering Ltd - M181 001 3C - 12/2007