Elster A1140 User Manual page 152

______________________________________________________________________________
Programming/Reading a Meter
At the C> prompt type
CHK (HUSKY)
Press Enter Select scheme to be transferred
Uploading Readings - In the Power Master Unit,
select Transfer/Launch OMS HHU Transfer Program
from the Main Menu.
Click OK (OMS top level menu is displayed)
Click on HHU/Set up
Power Master Unit sets up the Meter, Master Unit
path and Procedures automatically. If the load profile
data has been read, check Upload BUD Files.
The HHU and the Comm port should be set up as
appropriate.
Click OK when all parameters are set.
Note: If any modifications are made, selecting
HHU/Save Set Up can save them.
Upload - To Upload the files from HHU, follow the flowchart below:
At the HHU
With CHIRPS for the H USKY
Sele ct Co mms
This starts HCOM
or
At C> Type HCO M
Press Enter
After Transfe r Pre ss ESC
A t the HHU
Select Manual When the transfer is complete
Press Enter
Press Enter
HU SKY F ile tra nsfer Utility
'Press Escape to Exit' is displayed
the HHU responds with an
Achievement Byte
(0 if successful)
\OMS_TRAN\RESULTS
At the PC
Select HHU
Cli c k Transfer
Files a re transferred to the PC
Sele ct System
Exit
Power Master Unit
Select Quit
Press Enter
X
Mpalm 3000
53