Elster A1140 User Manual page 153

A1120/1140 Programmable Polyphase Meter Users Manual
54
_____________________________________________________________________________________
Configuration
If the HHU.CFG on the HHU is lost or corrupt, a new configuration file can be downloaded to the HHU.
Select HHU/Config File.
Set the parameters as shown below:
Click on data to be edited and type changes. (TAB can also be used to move between entries).
Click on OK
Select HHU/Set up
In the procedures section, only Download HHU Config should be selected
Click OK
With CHIRPS for the HUSKY
Select Comms
This starts HCOM
or
At C> Type HCOM
Press Enter
Number of retries - This is the number of tries CHIRPS repeats the FLAG message before
terminating with an error message.
© Elster Metering Ltd - M181 001 3C - 12/2007
At the HHU
HUSKY File transfer Utility
'Press Escape to Exit' is displayed
After Transfer Press ESC
HHU Config. File
Number of Retries
Date of Expire
Number of Sessions
HHU Identification
File Size
Comms Port
Timing 1
Timing 2
Timing 3
Timing 4
OK Cancel
Files are transferred to the HHU
5
311279
0000
HuskyFS2
12
COM1
1600
3000
0200
0100
At the PC
Select HHU
Click Transfer
Select System
Exit