Utility Display; Checksum; Deferred Tariff/Display - Elster A1140 User Manual

18
A1120/1140 Programmable Polyphase Meter Users Manual
___________________________________________________________________
To transfer a group of sequential displays - Click on the first display in the list.
Hold down the shift key.
Click the last display required in the list (the displays will appear highlighted) then drag the highlighted
displays to the display list.
Using the Buttons
To Transfer a display - Select the required display from the Available display list.
Click the
To Remove a display from the display list - Click on the required display
Click the
To Change the display order - Click on the required display and click the
display upwards in the display order.
Click on the required display and click the
order.

Utility Display

Up to 40 Displays can be shown in the A1120/40 Utility display sequence.
The displays are entered in exactly the same way as the Consumer Display.

Checksum

This includes a checksum of the complete Tariff/Display Scheme. The checksum can be used to verify
the meter is running the same scheme as in the PMU.
3.4.5

Deferred Tariff/Display

The deferred Tariff/Display is a pre-defined tariff that will become active specified by the user in the
Deferred Tariff Setup.
The setup for the deferred Tariff/Display is exactly the same as Tariff/Display.
© Elster Metering Ltd - M181 001 3C - 12/2007
button. The display is transferred from the Available display list to the Display list.
button. The display is removed.
button to move the display downwards in the display
button to move the