Default Display - Elster A1140 User Manual

17
Power Master Unit
___________________________________________________________________________
Choosing the Exclusion Date Type
The Exclusion Date can be set to one of the following options:
Set to day type – this sets an Exclusion Date to a particular day as
defined in the Define season day list
Set to specific day of the same season – this sets the Exclusion
date to a specific day of the Season currently selected
Set to specific season – this sets the Exclusion date to the day
currently selected of a specific Season.
Exclusion Date Repetition
The A1120/40 meter Exclusion Date repetition can
be applied in the following ways:
Every year
Specified year only
Repeated every four years from the specified date
The set to first option allows the Exclusion date to be
applied on a selected day of the week on or after the
specified date.
st th st
e.g. set 1 Monday after April 25 to obtain 1 Monday in May.

Default Display

Up to 40 Displays can be shown in the A1120/40
Default display sequence.
For ease of building, the displays are arranged in a
number of sections which can be chosen from the
Selection drop down box. Displays can be in English or
displayed as OBIS codes.
To display OBIS codes, check the Enable OBIS codes
checkbox.
To change or enter OBIS codes, select the Defaults
Tab. Highlight the field to be changed and type in the
new code (A maximum of five characters are allowed
for the full OBIS code).
Building the display
The available displays can be entered using Drag and Drop or by using the Button.
Drag and Drop
Click on the required display from the Available displays list and hold down the leftmost mouse
button. Drag the selected display Item from the Available display list to the Display list.