Time & Date - Elster A1140 User Manual

___________________________________________________________________________
Voltage Phase Status - Allows the voltage phase indicators (L1, L2, L3) to be displayed as phase fail
or phase present. The indicators can be enabled or disabled from the display.
Billing Reset Lockout - Manual billing resets can be locked out until midnight or locked out for a set
duration.
Display Overrides - Allows the meter error message to be omitted from the display.
Error (Alarm) Icon - This option allows the Error Icon to be omitted from the display.
Quadrant Icon - This option allows the quadrant icon to be omitted from the display.
Communications Indicator - This option allows the communications indicator (o optical, r remote) to
be omitted from the display.
End of Billing Button - This option allows the End of Billing button to be enabled or disabled.
Reverse Run Indicators - This option allows the System Reverse Run Indicator to be enabled or
disabled and the per phase reverse run indicators (flashing L1, L2, L3) to be enabled or disabled.
3.4.13 Time & Date
Meter Time Adjustment
This allows the meter time to be adjusted in the following ways.
1. Set the Meter time to the PC (or HHU) clock
time
Password level 1 allows Time Adjust
Password level 3 allows Time Set
2. Time adjust the Meter time (by 5 seconds
every integration period), until the Meter
time matches the PC Clock time. The
maximum time a meter can be adjusted is
+/-7.5 minutes.
Daylight Savings
Daylight Savings can be advanced
or retarded by 1 or 2 hours or can
be disabled.
Enter the Week (1 to 4, Last),
Weekday, Month and Hour for
Advance and Retard for Daylight
Savings. Week/Last will action
Daylight Savings on the last Weekday of the month.
Note. The advance and retard need to be the same.
Power Master Unit
25