6.2.1
Display of the slot configuration
The F96Plus is equipped with an automatic detection which module is mounted in which slot
(port). This detection will be shown in the display in loop 3 in two different sequences for port 1
resp. port 2. The two sequences will be shown alternating.
Example slot 1:
Example slot 2:
Module detection:
Module type
No module
M-Bus
RS232
RS485
Pulse input
Pulse output
Analogue output
automatic alternating display
2 – 4 sec.
automatic alternating display
2 – 4 sec.
Module code in the display
37