Before You Begin - Cisco S190 Quick Start Manual

Welcome

Before You Begin

2
Where to Go from Here
•
Cisco Notification Service
•
Thank you for choosing the Cisco S190 Web Security Appliance (Cisco S190).
The Cisco S190 helps organizations secure and control web traffic.
This guide describes how to physically install the Cisco S190 appliance and use
the System Setup Wizard to configure basic settings. You can also refer to the
AsyncOS for Cisco Web Security Appliances User
how to configure appliance settings.
Before you begin the installation, make sure that you have the items needed. The
following items are included with the Cisco S190 Web Security Appliance:
Rails and adaptor kit
•
Power cable
•
Ethernet cable for connecting the appliance to your network
•
Regulatory Safety and Compliance Information
•
You will need to provide the following items yourself:
Rack cabinet enclosure (if rack-mounting the appliance)
•
Phillips-head screwdriver for assembling rails
•
10/100 Gigabit Base-T TCP/IP LAN
•
Desktop or laptop computer
•
Web browser (or SSH and terminal software)
•
Network and administrator information for the
•
Settings" section on page 3
Guide.for information about
"Document Network
and "go live" configuration