Table of Contents
Advertisement
Mounting
Set the date and time once automatic adaptation is complete.
►
Setting the date and time
The date and time must be set when first configuring the
controller and after each battery change (please also refer to
Page 13).
Keep the
►
A four-digit number – the year – flashes in the display.
Turn the adjusting ring until the current year is displayed.
►
Press the
►
Two digits flash in the display for the month.
Turn the adjusting ring until the current month is displayed.
►
Press the
►
Adapt the day, hour and minute by the same method until the current
►
setpoint temperature is displayed.
The date and time are set.
14
button pressed for at least 2 seconds.
button.
button.
Advertisement
Table of Contents
